pulse baghouse adopts an advanced pulse blowback system, which has a much better cleaning effect than mechanical vibration cleaning or low-pressure blowback dust cleaning, and has no moving elements, which can greatly reduce the maintenance workload.

pulse bag collectors are widely used to capture industrial dust and volatiles with non-bonded fly fibers, capturing dust particles up to 0.02 microns. The bag collector has a high purification efficiency, and the efficiency of capturing fine dust can also reach more than 99.

Product composition:

The pulse baghouse consists of five parts, which are the air purifier, dust gas box, ash hopper, blowing device and bracket.

1. Clean air box part: This part is equipped with a blow pipe, the upper part has a clean air outlet, and the front is an access door, which can easily replace any filter bag when opening the access door.

2. Dust part: The dust inlet is located in the upper part of the gas box, and the box is equipped with a filter bag.

3. Ash hopper part: After the dust enters the dust air box, the clean air air filter bag goes to the clean air box. The ash hopper will settle into the ash hopper. And the settling direction is the same as the airflow direction, which is conducive to the settlement of the ash hopper, and there is a partition between the clean air box and the dust gas box.

4. The anti-blowing device is installed under the air scrubbing box, including air bags, pulse valves, pulse controllers, etc.